|
|
本帖最後由 ykluk 於 2011-11-15 10:18 編輯
我搵唔返D POST勒, 我記得有幾個師兄問過我會唔會做 VIABLUE喇叭腳既團購的, 因為呢隻野我都未試過, 我唔敢 ...
小瑟 發表於 2011-11-15 09:20 
呢隻腳好似係要有螺絲位上腳既, 各位有興趣ching最好都係睇一睇個spec先:
QTC SPIKES BLACK
Asorbtion and a noble design.
ViaBlue™ QTC Spikes receive vibrations from vibrating bodies such as speakers (such as diaphragms) and devices (such as transformers) and reduce them. Maximum pressure builds up at connection point between vibrating bodies and their bases, using a high mass concentrated on three minimum points (peaks), The vibrations are eliminated through the extreme pressure points. This leads to vibration absorption.
32 parts. Highest precision.
Through the vibration reception disk, vibrations are received on the rotary plate with adjustable height. The vibrations gathered in the main cone are deflected. Excess pressure builds up and is transferred to the especially hardened points. On the equally identically hardened absorption master disk, a maximum pressure point is then created. The vibrations are eliminated.
A total of 4 spikes per set are included in the delivery. A spike consists of: a grounding component with attached master disk, steel-hardened peak, main cone, rotary disk of adjustable height with attached vibration reception disk, M6 threaded rod and an M6 drive-in nut.
With the M6 to M6 thread stick included, QTC spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating. For speaker cases and devices with built-in M8 threads, special M6/M8 thread sticks go from the QTC spikes M6 threads to M8 threads. Optionally M6 to M4, M6 to M8, M6 to M10, M6 to M12 and M6 to 1/4"-20UNC are available.
HS SPIKES BLACK
Absolutely on the point.
ViaBlue™ HS spikes receive vibrations from vibrating bodies like speakers (such as diaphragms) and devices (such as transformers and reduces them. The vibrations are absorbed through the high pressure point achieved, where the maximum weight (speakers, devices) is concentrated on a minimum point (point of the spike). Most notably, the bass acoustics sound clearer, cleaner and more distinct. Thus, the bass is not transmitted to the furnishings and buildings, but can develop freely in the room.
16 components. Highest precision.
Each ViaBlue HS Spike consists of a total of 4 components: the main absorber cone, a base plate, the M6 to M6 thread stick and an M6 drive-in nut. Not only are the acoustics more distinct, but visually the HS spikes are an eye-catcher. Material/ ground: brass, black-chrome, Ø = 0.70 inch, M6 threads, loads of at least 50 kg per set (4 spikes per box)
With the M6 to M6 thread stick included, HS spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating. For speaker cases and devices with built-in M8 threads, special M6/M8 thread sticks go from the HS spikes M6 threads to M8 threads. Optionally M6 to M4, M6 to M8, M6 to M10, M6 to M12 and M6 to 1/4"-20UNC are available.
The three-part HS spikes are adjustable in height. The initial height is 1.5 inch. The maximum height adjustment recommended is 0.15 inch. The spikes are delivered with drive-in nuts. |
|
[複製鏈接]
一名永遠的入門玩家, 對電影, 音樂, 影音等玩意永遠雀躍, 其後為了可以將這個毒海無涯信念推展開去, 故建立了這個毒人唔洗本的影音娛樂資訊平台
樓主
發表於 2011-11-15 09:35
