DIY灌沙線的玩法 - Updated P.5

djaddy

U mean u want me to sell my DIY cables?

見笑,見笑.

djaddy

hi djaddy ,快0的係76呢度推廣下多0的灌沙線材俾大家,助推
ken2000 發表於 2009-11-30 15:46

Actually, all chings w/ 83803 must try 灌沙! The original teflon coating is very poor. 灌沙 makes one hell of a difference.

ken2000

agree........我都有一條{:1_337:}
我考慮條訊號線灌沙,唔知Djaddy兄點睇呢

djaddy

The purpose of 灌沙線 is to lower or eliminate harmonic vibrations & EMF that is generated during the flow of electricity. Compared with power cables, the EMF & harmonic vibrations are much lower. However, this doesn't mean they dun exist. There are various techniques used to eliminate the EMF & harmonic vibrations in 訊號線 (IC).

Give it a test by all means, but it may be harder to seal off both ends of the IC compared with pc.

Looking forward to your report!

ken2000

條線咁重,唔知個焊位頂唔頂得順,都係諗諗先

djaddy

yes, indeed it is quite high risk. I prefer to seek alternatives.

djaddy

DIY 灌沙 will provide better shielding for all PCs with poor insulation. As previously observed, NanoTech 301 & 302 has basically no shielding. Other chings mentioned that 302 is great for DIY灌沙. Emm... but it's a bit expensive for my interest.

ram

詳盡清楚!!!!!!

djaddy

Thank you for your complements.

sayye@h

Actually, all chings w/ 83803 must try 灌沙! The original teflon coating is very poor. 灌沙 makes one hell of a difference.
djaddy 發表於 2009-11-30 16:35

咁即係要成條線皮連網去左佢???