BD Player: OPPO BDP-93/BDP-95 BETA 版 試用 (May 2, 2011)

杰仔

OPPO BDP-93/BDP-95 新固件BETA版尝鲜试用
OPPO BDP-93/BDP-95 Blu-ray Disc Player Firmware Update
Release Information:

Release date: May 2, 2011
Category: Public Beta Release
Main Version: BDP9x-46-0428B
Loader Version: CN0500
Sub Version: MCU93-09-0218 (BDP-93), MCU95-08-0218 (BDP-95)
Note: This release is still a beta test version, not an official release. Use it only if you would like to experiment with the new features and improvements. There is a very small chance of the new features and improvements not working properly. If that happens, please report any issue to us.

Release Notes:

This version is designed for the OPPO BDP-93 and BDP-95 Blu-ray Disc players. Comparing to the previous official release version BDP9x-42-0323, the major changes included in this version are:
·Improved the Speaker Configuration options under Audio Processing. It is now possible to independently set distances for each speaker (previously speaker groups were treated as linked pairs), speaker distances can now be set to the actual spatial distance of the speakers (previously no speaker could be set further from listening position and the Front Left/Right speakers), “Test Tones” can now be used in conjunction with the player’s internal trim controls, speaker distances can now be set in quarter foot increments and speakers no longer require a minimum distance.
·Added the Zoom and Aspect Ratio (AR) adjustment for BD-Java enabled discs (available on HDMI 1 only). To take advantage of this functionality, set the Primary Output to HDMI 1 (Video Setup), use a resolution other than “Source Direct”, and use the HDMI 1 output on the BDP-93. During the disc playback, press the ZOOM button to change the zoom level and AR on the fly. A momentarily black screen may be observed but this is normal. Please note that 3D BD-Java Blu-rays do not allow for Zoom adjustments.
·Improved HDMI compatibility with some Audio/Video (AV) receivers. Some customers reported that after updating to the current Official 42-0323 firmware, HDMI handshake problems (such as momentary black screen, audio and/or video dropout, flashing screen, etc.) were observed, and in most cases, it only happened on HDMI 1 not on HDMI 2.
·Improved access and read speed to external hard drive (HDD) connected with USB or eSATA, especially when two external HDDs are connected in parallel.
General disc compatibility improvement based on recent and upcoming Blu-ray releases as well as user-submitted disc samples.

All features and improvements of the previous firmware are also included in this version.

下载：http://download.oppodigital.com/BDP93/BDP9x-46-0428B.zip
提高AV功放兼容性以及USB硬盤讀取性能。都系大家推薦升級。

杰仔

OPPO BDP-93/BDP-95 Blu-ray Disc Player Firmware Update 固件版本說明:發行時間: May 2, 2011固件類型: Beta版測試軟件
固件版本: BDP9x-46-0428B機芯軟件版本: CN0500MCU軟件版本: MCU93-09-0218 (BDP-93), MCU95-08-0218 (BDP-95) 備注: 這個版本的軟件是一個測試軟件，不是正式發布的軟件版本.
此版本是針對OPPO BDP-93以及BDP-95藍光碟機所設計。和之前正式發行的BDP9x-42-0323相比，此版本的主要更改包括以下幾個方面：·改進了音頻處理模式下的音箱配置選項。現在可以單獨設置每個音箱的距離。·對於帶BD-Java功能的碟片，添加了縮放及屏幕高寬比調整功能（只適用於HDMI1）。使用此功能，需要將視頻輸出設置為HDMI1（視頻設置），分辨率不能設置在“Source Direct”，使用HDMI1輸出。播放此碟片過程中，按ZOOM按鍵更改變縮放級別以及AR on the fly。可能會看到有暫時的黑屏現象，不過這是正常的。請注意，3D BD-Java藍光碟片不允許縮放調整。·改進了HDMI在一些音頻/視頻接收器的兼容性。一些客戶反饋說更新到現在的42-0323版本的固件之後，發現有HDMI握手錯誤（如，短暫的黑屏，音頻及/或視頻中斷，閃屏等），並且這種問題大多發生在HDMI1上而非HDMI2上。·改進了通過USB或eSATA連接的外接硬盤（HDD）的使用及讀取速度，尤其是兩個外接HDD並排連接的時候。·基於最近及未來發行的藍光碟片以及用戶提交的碟片樣本的兼容性做了改進。